[Machtl]

MagicQ version 1.3.6.2

New Functions

Improved the Cue Window to enable easier previewing of Cues when in tracking modes –
there is now a View Tracking option. When this option is on the Window shows all of the
values that are tracking from previous Cues as well as the data in the selected Cue. The
tracked data is shown in dark colour whereas the data from the selected Cue is shown in
active colours.
It is now possible to use the Entire State option when including Cues into the programmer –
this enables the whole of the current state of a Cue to be included into the programmer
including values that are tracking through from previous Cues.
There are new short cuts: ALL + RECORD to record entire state and ALL + INCLUDE to
include the entire state of a Playback.
Support for Hippo v3 thumbnails and live previews. In the Media Window, set the version
for the media server configured as Hippo to 3.

Bug fixes

Fixed problem when using new HTP Always Active option when All Channels Controlled
LTP was always active. After releasing a Playback controlling a channel it was possible to
get the channel erroneously at the same level on another Playback. (Affected v1.3.6.1 only)

Fixed problem when using new HTP Always Active option when Move When Dark was
enabled. Move When Dark channels became activated before the Cue Stack was activated
(Affected v1.3.6.1 only)

Fixed problem when using new HTP Always Active option with Cue Stacks with more than
one step – the dimmers dipped when activating the Cue Stack. (Affected v1.3.6.1 only)

Fixed problem when using All Channels Controlled LTP on two playbacks and swapping
between the two using the GO button. (Affected v1.3.6.1 only)

Fixed problem which could cause a reset when saving a show. If the show was saved when
the console was in the middle of an auto save then a reset may occur after the save has
finished. No show data is lost, but the application does reset. To work around this problem
turn off autosave before performing a save function. (#263)

Fixed problem with Coolux media thumbnails in v1.3.6.1.

Playback Stomping was broken in v1.3.6.1

Using CTRL ALL or FAN ALL to reselect all heads in the Programmer only reselected heads
if their first attribute (i.e. channel 1 in Head Editor) was in the Programmer. (#176)

Fixed problem with move when dark when playback fader level was 0. MagicQ would move
when dark channels even thought they were used in the Cue (but were at 0 due to Playback
fader level). (#169)

Fixed problem with Multiwindows / 2nd monitor output whereby the external windows / 2nd
window would rapidly open and close. This occurred if a Window was moved to the external
window, but then a new Layout was selected which did not have the external window in the
Layout. This could be worked around by adding the external window to the Layout.